If you want to know why TeamViewer keeps kicking me out. This guide addresses issues where TeamViewer kicks users out after a minute and provides insights into why connections are blocked after timeouts, helping to restore stable access.
How frustrating it is to constantly wonder why does TeamViewer keep kicking me out when you are attempting to work. You might find that your TeamViewer connection is blocked after timeout errors appear on the screen or simply notice that TeamViewer kicks me out after a minute of active use.
If TeamViewer keeps kicking you out repeatedly the primary cause is often a suspected commercial use detection on a free account or an idle session timeout configuration that needs immediate adjustment. Resolving this quickly requires verifying your current license status and modifying specific advanced network options within the software to prevent further interruptions. This comprehensive guide details the effective troubleshooting steps to fix these disconnects.
We will help you resolve the error where the TeamViewer connection is blocked so you can finally restore stable and reliable access to your remote devices.
If TeamViewer keeps kicking you out, switching to a more stable remote desktop solution is often the most practical move. Although TeamViewer is widely used, frequent disconnections, timeouts, and commercial use detection can seriously disrupt remote sessions. In this situation, AnyViewer stands out as a reasonable and reliable alternative to try first before exploring other fixes.
AnyViewer is designed for users who need consistent and uninterrupted remote access, making it an ideal replacement when TeamViewer becomes unreliable. It delivers smooth and stable connections without abruptly ending sessions, even during long-term use. For personal users and professionals alike, it removes many of the limitations that commonly cause TeamViewer to disconnect.
Step 1. Install and run AnyViewer on both your work and home computers. Navigate to Log in and then Sign up for creating an AnyViewer account on the Controller computer (if you have already registered on the official website, you can log in directly).
Step 2. You should now see that you have successfully logged into AnyViewer. Your device will be assigned to the account automatically and listed on My devices list once logged in.
Step 3. Log in to the same AnyViewer account on both devices, then on your local device, go to Device, click the remote computer, and click One-click control to establish a direct connection.
Step 4. After successfully connecting, you will see the remote desktop. Then you can control it completely and provide remote support as if you were sitting in front of it.
TeamViewer relies on background services to maintain a stable connection. If the service glitches or freezes, restarting it can quickly restore normal communication.
Step 1. Press Win + R, type in “services.msc”, then click OK.
Step 2. Find TeamViewer. Right-click it and then choose Restart.
Step 3. Wait for the process to finish. Then try to connect via TeamViewer again.
This method works because TeamViewer may automatically disconnect sessions when there is no keyboard or mouse activity for a long time. Setting a proper timeout helps prevent unexpected disconnections caused by inactivity.
Step 1. Open TeamViewer (Classic), click the gear icon in the upper-right corner, then go to Advanced > Advanced settings for connections to other computers > Timing out inactive sessions.
Step 2. Select a time period after which an outgoing remote control session will be automatically closed if no interaction is detected.
Step 3. Click OK to save the changes and reconnect to check if the issue is resolved.
Older versions may have bugs or compatibility issues that cause repeated disconnections.
Step 1. Open TeamViewer and go to Help > Check for new version.
Step 2. Download and install the latest version if an update is available.
Step 3. If the issue continues, uninstall TeamViewer, restart your PC, then reinstall the newest version from the official website.
If the app itself is not the problem, your network environment may be forcing the connection to drop.
TeamViewer may automatically disconnect sessions if it suspects commercial usage on a free license.
Step 1. Open TeamViewer and check if you see messages like “Commercial use detected” or very short session time limits.
Step 2. Visit TeamViewer’s official Commercial Use Suspected reset page.
Step 3. Submit the form to request a license review and wait for confirmation.
If your account is not flagged, the disconnection may be caused by an outdated or corrupted app version.
Resetting the TeamViewer ID can help when the server flags your current ID due to frequent connections, network changes, or suspected commercial use.
Step 1. Follow the steps above to stop TeamViewer from the Services first.
Step 2. Open Registry Editor by entering “regedit.exe” in the Run box. Navigate to: HKEY_CURRENT_USER > Software > TeamViewer. Delete the TeamViewer registry key.
Step 3. Open the PowerShell console with administrator privileges and run the following command to determine the creation date of the "C:Program Files" folder:
Get-Item "C:\Program Files" | select Name,CreationTime
Step 4.Use the NirCMD tool to change the creation date of the Program Files folder. Download it and run it from the elevated Command Prompt console as follows:
nircmdc.exe setfilefoldertime "C:\Program Files" now now
Step 5. Check if the CreationTime value of the directory has changed.
Step 6. Then, using one of the special tools available, change the MAC address of your network card. Alternatively, you can edit your MAC address through the registry by following the steps outlined below.
Step 7. To get the current MAC address of your network card, open command prompt, and run the following command:
Ipconfig /all
Pay attention to two parameters: Description (LAN card description) and Physical Address (MAC address).
Step 8. Then, open the Registry Editor again and go to the key: HKLM > SYSTEM > CurrentControlSet > Control > Class > {4d36e972-e325-11ce-bfc1-08002be10318}.
Step 9. Find DriverDesc option, where the description (name) of your NIC must be specified (for example, Intel(R) 82574L Gigabit Network Connection). When you've found the correct network card, double-click the NetworkAddress parameter. It specifies the network card's MAC (hardware) address. It is sufficient to change a single digit in the current MAC address, such as 000C299D4D80.
Step 10. As a result, the network card's MAC address is changed. You must now modify the VolumeID of the system partition. VolumeID (or Volume Serial Number) is a hard drive volume's unique identifier that is set during formatting. Use the console utility VolumeID v2.1 to change the VolumeID v2.1. VolumeId.zip should be downloaded and extracted.
Step 11. Open Command Prompt with Administrator privileges and run the following command to determine the current VolumeID:
vol
Volume Serial Number is 5E37-ECE1.
Step 12. Replace the current value with the new value 5E37-EC11:
c:\users\root\Downloads\VolumeID
Volumeid.exe c: 5E37-EC11
Step 13. Close the command prompt and restart your computer. Then restart TeamViewer, and you'll be given a new TeamViewer ID.
This method works because corrupted program files, leftover folders, or old registry entries can cause TeamViewer to disconnect unexpectedly. A clean reinstall ensures the app starts fresh with no conflicting data.
Step 1. Uninstall TeamViewer from Control Panel > Programs and Features.
Step 2. Open File Explorer and delete any remaining TeamViewer folders from
C:\Program Files\TeamViewer and C:\Program Files (x86)\TeamViewer.
Step 3. Press Win + R, type %appdata%, and delete the TeamViewer folder if it exists.
Step 4. Restart your computer, then download and install the latest version of TeamViewer from the official website.
If TeamViewer still keeps kicking you out after a clean reinstall, your account may be incorrectly flagged for commercial use.
This solution works because persistent “Connection blocked after timeout” errors may be caused by account-level restrictions or backend issues that only TeamViewer can resolve.
Step 1. Open TeamViewer and confirm that your license is activated and signed in correctly.
Step 2. Go to the official TeamViewer Support or Submit a ticket page.
Step 3. Describe the "Connection blocked after timeout” issue in detail and include your TeamViewer ID, license information, and any error messages shown.
Step 4. Submit the request and wait for a response from the TeamViewer support team.
Once TeamViewer verifies your account and fixes the restriction, your remote connections should work normally without being disconnected.
If TeamViewer keeps kicking me out, it usually means the connection is being limited or interrupted by software rules, account restrictions, or network issues. Many users experience problems like TeamViewer connection blocked after timeout or being disconnected after one minute, even though everything seems normal. Understanding the common causes makes it much easier to choose the right fix and restore a stable remote connection.
| Common reason | Simple explanation |
|---|---|
| Commercial use suspected | TeamViewer may think you are using it for business, even if it is personal use, and limit the session time |
| Inactive session timeout | If there is no mouse or keyboard activity, TeamViewer may end the session automatically |
| Unstable internet connection | Weak or changing networks can cause TeamViewer to drop the connection |
| Firewall or antivirus blocking | Security software may block TeamViewer ports or background services |
| Outdated or corrupted app files | Old versions or damaged files can cause repeated disconnections |
| License or account issues | An expired, inactive, or improperly activated license can trigger timeout blocks |
Now that you know why TeamViewer kicks you out after a short time, you can move on to the specific solutions above by clicking the Table of Contents on the left side to fix the issue and keep your remote sessions connected without interruption.
If TeamViewer keeps kicking you out, the problem is usually linked to license limits, commercial use detection, inactivity timeout settings, or unstable software and network conditions. By following the fixes in this guide, you can clearly identify what is causing the TeamViewer connection to be blocked after timeout and take the right action to stop repeated disconnections. In most cases, adjusting settings, updating or reinstalling the app, or verifying your account status can quickly restore stable access. If the issue continues, switching to a reliable alternative like using AnyViewer or contacting TeamViewer support ensures you can keep working remotely without constant interruptions.